This section applies to Windows 98/Me and Windows NT/2000/XP. PHP will not work on 16 bit platforms such as Windows 3.1 and sometimes we refer to the supported Windows platforms as Win32. Windows 95 is no longer supported as of PHP 4.3.0.
There are two main ways to install PHP for Windows: either manually or by using the InstallShield installer.
If you have Microsoft Visual Studio, you can also build PHP from the original source code.
Once you have PHP installed on your Windows system, you may also want to load various extensions for added functionality.
The Windows PHP installer is available from the downloads page at http://www.php.net/downloads.php. This installs the CGI version of PHP and, for IIS, PWS, and Xitami, configures the web server as well.
Note: While the InstallShield installer is an easy way to make PHP work, it is restricted in many aspects, as automatic setup of extensions for example is not supported. The whole set of supported extensions is only available by downloading the zip binary distribution.
Install your selected HTTP server on your system and make sure that it works.
Run the executable installer and follow the instructions provided by the installation wizard. Two types of installation are supported - standard, which provides sensible defaults for all the settings it can, and advanced, which asks questions as it goes along.
The installation wizard gathers enough information to set up the php.ini file and configure the web server to use PHP. For IIS and also PWS on NT Workstation, a list of all the nodes on the server with script map settings is displayed, and you can choose those nodes to which you wish to add the PHP script mappings.
Once the installation has completed the installer will inform you if you need to restart your system, restart the server, or just start using PHP.
| Warning |
Be aware, that this setup of PHP is not secure. If you would like to have a secure PHP setup, you'd better go on the manual way, and set every option carefully. This automatically working setup gives you an instantly working PHP installation, but it is not meant to be used on online servers. |
This install guide will help you manually install and configure PHP on your Windows webserver. The original version of this guide was compiled by Bob Silva, and can be found at http://www.umesd.k12.or.us/php/win32install.html. You need to download the zip binary distribution from the downloads page at http://www.php.net/downloads.php.
PHP 4 for Windows comes in three flavours - a CGI executable (php.exe), a CLI executable (sapi/php.exe) and some other SAPI modules:
| php4apache.dll - Apache 1.3.x module |
| php4apache2.dll - Apache 2.0.x module |
| php4isapi.dll - ISAPI Module for ISAPI compliant webservers like IIS 4.0/PWS 4.0 or newer. |
| php4nsapi.dll - Netscape/iPlanet module |
| Warning |
The SAPI modules have been significantly improved in the 4.1 release, however, you may find that you encounter possible server errors or other server modules such as ASP failing, in older systems. |
DCOM and MDAC requirements: If you choose one of the SAPI modules and use Windows 95, be sure to download and install the DCOM update from the Microsoft DCOM pages. If you use Microsoft Windows 9x/NT4 download the latest version of the Microsoft Data Access Components (MDAC) for your platform. MDAC is available at http://msdn.microsoft.com/data/.
The following steps should be performed on all installations before any server specific instructions.
Extract the distribution file to a directory of your choice, c:\ is a good start. The zip package expands to a foldername like php-4.3.1-Win32 which is assumed to be renamed to php. For the sake of convenience and to be version independent the following steps assume your extracted version of PHP lives in c:\php. You might choose any other location but you probably do not want to use a path in which spaces are included (for example: C:\Program Files\PHP is not a good idea). Some web servers will crash if you do. The structure of your directory you extracted the zip file will look like:
c:\php | +--cli | | | |-php.exe -- CLI executable - ONLY for commandline scripting | | +--dlls -- support dlls for extensions --> Windows system directory | | | |-expat.dll | | | |-fdftk.dll | | | |-... | +--extensions -- extension dlls for PHP | | | |-php_bz2.dll | | | |-php_cpdf.dll | | | |-.. | +--mibs -- support files for SNMP | | +--openssl -- support files for Openssl | | +--pdf-related -- support files for PDF | | +--sapi -- SAPI dlls | | | |-php4apache.dll | | | |-php4apache2.dll | | | |-php4isapi.dll | | | |-.. | |-install.txt | |-.. | |-php.exe -- CGI executable | |-.. | |-php.ini-dist | |-php.ini-recommended | |-php4ts.dll -- main dll --> Windows system directory | |-... |
The CGI binary - c:\php\php.exe -, the CLI binary - c:\php\cli\php.exe -, and the SAPI modules - c:\php\sapi\*.dll - rely on the main dll c:\php\php4ts.dll. You have to make sure, that this dll can be found by your PHP installation. The search order for this dll is as follows:
| The same directory from where php.exe is called. In case you use a SAPI module the same directory from where your webserver loads the dll (e.g. php4apache.dll). |
| Any directory in your Windows PATH environment variable. |
The best bet is to make php4ts.dll available, regardless which interface (CGI or SAPI module) you plan to use. To do so, you have to copy this dll to a directory on your Windows path. The best place is your Windows system directory:
| C:\Windows\System for Windows 9x/ME |
| C:\WINNT\System32 for Windows NT/2000 or C:\WINNT40\System32 for NT/2000 server |
| C:\Windows\System32 for Windows XP |
The next step is to set up a valid configuration file for PHP, php.ini. There are two ini files distributed in the zip file, php.ini-dist and php.ini-recommended. We advise you to use php.ini-recommended, because we optimized the default settings in this file for performance, and security. Read this well documented file carefully and in addition study the ini settings and set every element manually yourself. If you would like to achieve the best security, then this is the way for you, although PHP works fine with these default ini files. Copy your chosen ini-file to a directory where PHP is able to find and rename it to php.ini. By default PHP searches php.ini in your Windows directory:
| On Windows 9x/ME/XP copy your chosen ini file to your %WINDIR%, which is typically C:\Windows. |
| On Windows NT/2000 copy your chosen ini file to your %WINDIR% or %SYSTEMROOT%, which is typically C:\WINNT or C:\WINNT40 for NT/2000 servers. |
If you're using NTFS on Windows NT, 2000 or XP, make sure that the user running the webserver has read permissions to your php.ini (e.g. make it readable by Everyone).
The following steps are optional.
Edit your new php.ini file. If you plan to use OmniHTTPd, do not follow the next step. Set the doc_root to point to your webservers document_root. For example:
Choose which extensions you would like to load when PHP starts. See the section about Windows extensions, about how to set up one, and what is already built in. Note that on a new installation it is advisable to first get PHP working and tested without any extensions before enabling them in php.ini.
On PWS and IIS, you can set the browscap configuration setting to point to: c:\windows\system\inetsrv\browscap.ini on Windows 9x/Me, c:\winnt\system32\inetsrv\browscap.ini on NT/2000, and c:\windows\system32\inetsrv\browscap.ini on XP.
Following this instructions you are done with the basic steps to setup PHP on Windows. The next step is to choose a webserver and enable it to run PHP. Installation instructions for the following webservers are available:
.. the Windows server family, Personal Web server (PWS) 3 and 4 or newer; Internet Information Server (IIS) 3 and 4 or newer.
.. the Apache servers Apache 1.3.x, and Apache 2.x.
.. the Netscape/iPlanet servers.
.. the OmniHTTPd server.
.. the Oreilly Website Pro server.
.. the Sambar server.
.. the Xitami server.
Before getting started, it is worthwhile answering the question: "Why is building on Windows so hard?" Two reasons come to mind:
Windows does not (yet) enjoy a large community of developers who are willing to freely share their source. As a direct result, the necessary investment in infrastructure required to support such development hasn't been made. By and large, what is available has been made possible by the porting of necessary utilities from Unix. Don't be surprised if some of this heritage shows through from time to time.
Pretty much all of the instructions that follow are of the "set and forget" variety. So sit back and try follow the instructions below as faithfully as you can.
To compile and build PHP you need a Microsoft Development Environment. Microsoft Visual C++ 6.0 is recommended. To extract the downloaded files you need a extraction utility (e.g.: Winzip). If you don't already have an unzip utility, you can get a free version from InfoZip.
Before you get started, you have to download...
..the win32 buildtools from the PHP site at http://www.php.net/extra/win32build.zip.
..the source code for the DNS name resolver used by PHP from http://www.php.net/extra/bindlib_w32.zip. This is a replacement for the resolv.lib library included in win32build.zip.
If you plan to compile PHP as a Apache module you will also need the Apache sources.
Finally, you are going to need the source to PHP 4 itself. You can get the latest development version using anonymous CVS, a snapshot or the most recent released source tarball.
After downloading the required packages you have to extract them in a proper place.
Create a working directory where all files end up after extracting, e.g: C:\work.
Create the directory win32build under your working directory (C:\work) and unzip win32build.zip into it.
Create the directory bindlib_w32 under your working directory (C:\work) and unzip bindlib_w32.zip into it.
Extract the downloaded PHP source code into your working directory (C:\work).
+--c:\work | | | +--bindlib_w32 | | | | | +--arpa | | | | | +--conf | | | | | +--... | | | +--php-4.x.x | | | | | +--build | | | | | +--... | | | | | +--win32 | | | | | +--... | | | +--win32build | | | | | +--bin | | | | | +--include | | | | | +--lib |
Note: Cygwin users may omit the last step. A properly installed Cygwin environment provides the mandatory files bison.simple and bison.exe.
The next step is to configure MVC ++ to prepare for compiling. Launch Microsoft Visual C++, and from the menu select Tools => Options. In the dialog, select the directories tab. Sequentially change the dropdown to Executables, Includes, and Library files. Your entries should look like this:
Executable files: c:\work\win32build\bin, Cygwin users: cygwin\bin
Include files: c:\work\win32build\include
Library files: c:\work\win32build\lib
You must build the resolv.lib library. Decide whether you want to have debug symbols available (bindlib - Win32 Debug) or not (bindlib - Win32 Release). Build the appropriate configuration:
For GUI users, launch VC++, and then select File => Open Workspace, navigate to c:\work\bindlib_w32 and select bindlib.dsw. Then select Build=>Set Active Configuration and select the desired configuration. Finally select Build=>Rebuild All.
For command line users, make sure that you either have the C++ environment variables registered, or have run vcvars.bat, and then execute one of the following commands:
msdev bindlib.dsp /MAKE "bindlib - Win32 Debug"
msdev bindlib.dsp /MAKE "bindlib - Win32 Release"
The best way to get started is to build the CGI version.
For GUI users, launch VC++, and then select File => Open Workspace and select c:\work\php-4.x.x\win32\php4ts.dsw . Then select Build=>Set Active Configuration and select the desired configuration, either php4ts - Win32 Debug_TS or php4ts - Win32 Release_TS. Finally select Build=>Rebuild All.
For command line users, make sure that you either have the C++ environment variables registered, or have run vcvars.bat, and then execute one of the following commands from the c:\work\php-4.x.x\win32 directory:
msdev php4ts.dsp /MAKE "php4ts - Win32 Debug_TS"
msdev php4ts.dsp /MAKE "php4ts - Win32 Release_TS"
At this point, you should have a usable php.exe in either your c:\work\php-4.x.x.\Debug_TS or Release_TS subdirectories.
It is possible to do minor customization to the build process by editing the main/config.win32.h file. For example you can change the default location of php.ini, the built-in extensions, and the default location for your extensions.
Next you may want to build the CLI version which is designed to use PHP from the command line. The steps are the same as for building the CGI version, except you have to select the php4ts_cli - Win32 Debug_TS or php4ts_cli - Win32 Release_TS project file. After a successful compiling run you will find the php.exe in either the directory Release_TS\cli\ or Debug_TS\cli\.
Note: If you want to use PEAR and the comfortable command line installer, the CLI-SAPI is mandatory. For more information about PEAR and the installer read the documentation at the PEAR website.
In order to build the SAPI module (php4isapi.dll) for integrating PHP with Microsoft IIS, set your active configuration to php4isapi-whatever-config and build the desired dll.
After installing PHP and a webserver on Windows, you will probably want to install some extensions for added functionality. You can choose which extensions you would like to load when PHP starts by modifying your php.ini. You can also load a module dynamically in your script using dl().
The DLLs for PHP extensions are prefixed with 'php_' in PHP 4 (and 'php3_' in PHP 3). This prevents confusion between PHP extensions and their supporting libraries.
Note: In PHP 4.3.1 BCMath, Calendar, COM, Ctype, FTP, MySQL, ODBC, Overload, PCRE, Session, Tokenizer, WDDX, XML and Zlib support is built in. You don't need to load any additional extensions in order to use these functions. See your distributions README.txt or install.txt or this table for a list of built in modules.
The default location PHP searches for extensions is c:\php4\extensions. To change this setting to reflect your setup of PHP edit your php.ini file:
You will need to change the extension_dir setting to point to the directory where your extensions lives, or where you have placed your php_*.dll files. Please do not forget the last backslash. For example:
Enable the extension(s) in php.ini you want to use by uncommenting the extension=php_*.dll lines in php.ini. This is done by deleting the leading ; form the extension you want to load.
Example 3-3. Enable Bzip2 extension for PHP-Windows
|
Some of the extensions need extra DLLs to work. Couple of them can be found in the distribution package, in the c:\php\dlls\ folder but some, for example Oracle (php_oci8.dll) require DLLs which are not bundled with the distribution package. Copy the bundled DLLs from c:\php\dlls folder to your Windows PATH, safe places are:
| c:\windows\system for Windows 9x/Me |
| c:\winnt\system32 for Windows NT/2000 |
| c:\windows\system32 for Windows XP |
Note: If you are running a server module version of PHP remember to restart your webserver to reflect your changes to php.ini.
The following table describes some of the extensions available and required additional dlls.
Table 3-1. PHP Extensions
| Extension | Description | Notes |
|---|---|---|
| php_bz2.dll | bzip2 compression functions | None |
| php_calendar.dll | Calendar conversion functions | Built in since PHP 4.0.3 |
| php_cpdf.dll | ClibPDF functions | None |
| php_crack.dll | Crack functions | None |
| php3_crypt.dll | Crypt functions | unknown |
| php_ctype.dll | ctype family functions | Built in since PHP 4.3.0 |
| php_curl.dll | CURL, Client URL library functions | Requires: libeay32.dll, ssleay32.dll (bundled) |
| php_cybercash.dll | Cybercash payment functions | PHP <= 4.2.0 |
| php_db.dll | DBM functions | Deprecated. Use DBA instead (php_dba.dll) |
| php_dba.dll | DBA: DataBase (dbm-style) Abstraction layer functions | None |
| php_dbase.dll | dBase functions | None |
| php3_dbm.dll | Berkeley DB2 library | unknown |
| php_dbx.dll | dbx functions | |
| php_domxml.dll | DOM XML functions | PHP <= 4.2.0 requires: libxml2.dll (bundled) PHP >= 4.3.0 requires: iconv.dll (bundled) |
| php_dotnet.dll | .NET functions | PHP <= 4.1.1 |
| php_exif.dll | Read EXIF headers from JPEG | None |
| php_fbsql.dll | FrontBase functions | PHP <= 4.2.0 |
| php_fdf.dll | FDF: Forms Data Format functions. | Requires: fdftk.dll (bundled) |
| php_filepro.dll | filePro functions | Read-only access |
| php_ftp.dll | FTP functions | Built-in since PHP 4.0.3 |
| php_gd.dll | GD library image functions | Removed in PHP 4.3.2. Also note that truecolor functions are not available in GD1, instead, use php_gd2.dll. |
| php_gd2.dll | GD library image functions | GD2 |
| php_gettext.dll | Gettext functions | PHP <= 4.2.0 requires gnu_gettext.dll (bundled), PHP >= 4.2.3 requires libintl-1.dll, iconv.dll (bundled). |
| php_hyperwave.dll | HyperWave functions | None |
| php_iconv.dll | ICONV characterset conversion | Requires: iconv-1.3.dll (bundled), PHP >=4.2.1 iconv.dll |
| php_ifx.dll | Informix functions | Requires: Informix libraries |
| php_iisfunc.dll | IIS management functions | None |
| php_imap.dll | IMAP POP3 and NNTP functions | PHP 3: php3_imap4r1.dll |
| php_ingres.dll | Ingres II functions | Requires: Ingres II libraries |
| php_interbase.dll | InterBase functions | Requires: gds32.dll (bundled) |
| php_java.dll | Java functions | PHP <= 4.0.6 requires: jvm.dll (bundled) |
| php_ldap.dll | LDAP functions | PHP <= 4.2.0 requires libsasl.dll (bundled), PHP >= 4.3.0 requires libeay32.dll, ssleay32.dll (bundled) |
| php_mbstring.dll | Multi-Byte String functions | None |
| php_mcrypt.dll | Mcrypt Encryption functions | Requires: libmcrypt.dll |
| php_mhash.dll | Mhash functions | PHP >= 4.3.0 requires: libmhash.dll (bundled) |
| php_mime_magic.dll | Mimetype functions | Requires: magic.mime (bundled) |
| php_ming.dll | Ming functions for Flash | None |
| php_msql.dll | mSQL functions | Requires: msql.dll (bundled) |
| php3_msql1.dll | mSQL 1 client | unknown |
| php3_msql2.dll | mSQL 2 client | unknown |
| php_mssql.dll | MSSQL functions | Requires: ntwdblib.dll (bundled) |
| php3_mysql.dll | MySQL functions | Built-in in PHP 4 |
| php3_nsmail.dll | Netscape mail functions | unknown |
| php3_oci73.dll | Oracle functions | unknown |
| php_oci8.dll | Oracle 8 functions | Requires: Oracle 8.1+ client libraries |
| php_openssl.dll | OpenSSL functions | Requires: libeay32.dll (bundled) |
| php_oracle.dll | Oracle functions | Requires: Oracle 7 client libraries |
| php_overload.dll | Object overloading functions | Built in since PHP 4.3.0 |
| php_pdf.dll | PDF functions | None |
| php_pgsql.dll | PostgreSQL functions | None |
| php_printer.dll | Printer functions | None |
| php_shmop.dll | Shared Memory functions | None |
| php_snmp.dll | SNMP get and walk functions | NT only! |
| php_sockets.dll | Socket functions | None |
| php_sybase_ct.dll | Sybase functions | Requires: Sybase client libraries |
| php_tokenizer.dll | Tokenizer functions | Built in since PHP 4.3.0 |
| php_w32api.dll | W32api functions | None |
| php_xmlrpc.dll | XML-RPC functions | PHP >= 4.2.1 requires: iconv.dll (bundled) |
| php_xslt.dll | XSLT functions | PHP <= 4.2.0 requires sablot.dll, expat.dll (bundled). PHP >= 4.2.1 requires sablot.dll, expat.dll, iconv.dll (bundled). |
| php_yaz.dll | YAZ functions | Requires: yaz.dll (bundled) |
| php_zip.dll | Zip File functions | Read only access |
| php_zlib.dll | ZLib compression functions | Built in since PHP 4.3.0 |
| Sites of interest: Web Hosting : Reseller Hosting : Website Hosting : HTML Editor : Web Design Templates : Free Web Hosting : ASP code examples : PHP & MySQL Code Examples |
| Copyright © 2004 Evrsoft Developer Network. Privacy policy - Link to Us |
Contact Evrsoft |
||